Category Archives: plumbers charlotte nc

How to Select a new Hot Water Heater for your home

waterheaterSelecting a water heater isn’t as easy as it used to be. Which is actually a great problem to have. Thanks to advances in technology, there are options for different budgets, energy sources, and household sizes. Modern water heaters are more efficient than older units, as well as longer lasting and easier to service. Let’s explore the different types of water heaters and find which one is best for your needs.

Tips for Buying a Water Heater
What may be best for your neighbors down the road isn’t necessarily best for you.

What energy source do you have?
Gas water heaters use propane or natural gas to heat the water. Electric water heaters are plugged into your home’s power supply. Research the cost of these utilities in your area, and see which one is the most affordable. Your existing utilities should guide your choice.
How much hot water do you need?
Hot water heaters come in different sizes and are rated to supply a certain amount of gallons per hour (GPH). To narrow down your decision, ask yourself how much hot water you or your family need. Do you use water at an average rate, or do you need a little extra?
How much space do you have?
Traditional and hybrid hot water heaters take up a lot of space, whereas tankless water heaters are compact. Ask yourself where the water heater will be installed and how much room you have.
Finding the Perfect Hot Water Heater
Let’s break down the pros and cons of gas and electric water heaters:

Gas Water Heaters: These have a higher up-front cost and must be vented outside, but they are more affordable to operate long-term. Gas water heaters also have a higher recovery rate, which is the time it takes to reheat the water after it is depleted.

Electric Water Heaters: These are easy to maintain and install, but they cost more to run and have a slower recovery rate than gas. Electric water heaters are a better option for homes that do not already use gas for other appliances.

Water Heater Size Considerations
The size of traditional hot water heater you need depends on the amount of people in your home. Most manufacturers provide guidelines for their units. A family of four should typically look at 50-gallon water heater or larger models.

Don’t just rely on the capacity of your water heater to determine if it is large enough. You should also look at the first-hour rating (FHR), which tells you how much water the unit will heat in a set amount of time. When you’re shopping for a new unit, ask about the FHR or consult this water heater size guide from the Department of Energy.

How to Choose a Tankless Hot Water Heater
Homeowners like tankless hot water heaters because they’re compact. They’re also more efficient, since they do not keep a tank of hot water ready to go. They can deliver an endless supply of hot water for even the longest-shower takers. They come in both electric and gas models, so simply choose the one that’s most compatible with your home and your utility bills.

How to Choose a Traditional Water Heater
Once you’ve landed on the correct size of a traditional water heater, as explained above, the next matter to decide is which energy source to use. If other appliances in your home already use propane or natural gas, it makes sense to buy a gas water heater. Otherwise, electric is a better option, since it can be expensive to install gas utilities for a water heater.

How to Choose a Hybrid Water Heater
Hybrid water heaters have a high up-front cost but are significantly more efficient than their counterparts. They have more moving parts, which can complicate maintenance, and they also require regular filter cleaning. They also require a drain, since they produce condensation. Finally, they require a lot of space. Hybrid water heaters are ideal for warmer climates or climate-controlled rooms, as they’re sensitive to extreme temperatures.

Point-of-Use Hot Water?
Point-of-use hot water systems deliver hot water to only one faucet or sink. They’re perfect for utility rooms, tiny homes, or areas of the home where running plumbing for hot water is cost prohibitive.

Professional Water Heater Installation
Once you’ve found the right water heater, give Charlotte Pluming Repair a call for water heater installation. We’ll take care of all the necessary installation procedures and adhere to local building codes to ensure a reliable and efficient installation. Give us a call at (704) 394-5252, or request a job estimate online.

If you’re looking for more advice about home appliances or need experts to help you maintain them, call Mr. Appliance. As part of Neighborly’s network of home service providers, Mr. Appliance is a brand you can trust for expert appliance maintenance and repair.

This blog is made available by Charlotte Pluming Repair , for educational purposes only to give the reader general information and a general understanding on the specific subject above. The blog should not be used as a substitute for a licensed plumbing professional in your state or region. Check with city and state laws before performing any household project.
Categories:
Plumbing
Plumbing Tips

Common home plumbing problems

10171857_277256045768365_6058529927439442142_n

Plumbing systems in our homes just like other things does not last forever. They might due to failures in other external systems like being overwhelmed by overgrown tree roots or being broken by foreign objects. The plumbing system might also fail due to aging. Due to these, it is prudent that you learn how to handle some of the most common plumbing failures in your home to remedy the problem fast and to save the cost that you could have incurred if you called a plumber. The following are some of the plumbing problems that you might encounter in your home and how to handle the plumbing repair service.

TREE ROOTS
It may not be easy to see what is going on underground as far as tree roots growth is concerned. It may also be equally difficult to discern just how far the strong roots have reached and what they have damaged under the soil. Tree roots may sometimes find their way into pipe joints thereby causing breakage, leaks or complete blockages in sewerage systems. This may result into overflowing of the sewerage content on the ground which might be very filthy and a potential health hazard. To remedy this, it is advisable to apply chemicals that kill the roots that grow among pipes to prevent them from overwhelming the system in future. If the damage is already done, the only option is doing an overhaul of all the pipes around there, this time applying the chemicals to stop the roots or cutting trees that may be too close your house.

CITY SEWER COLLAPSE
A sewage burst that runs its way into your home is no doubt one of the most nauseating potential plumbing problems. It could be as a result of collapsed sewer or corroding pipes outside your home. Aged sewerage pipes made of brittle materials like asbestos and concrete can disintegrate over time. These may result to scam that flows along the course of least resistance including up through your home drainage line. You are responsible only for the sewer lateral, the line connecting your home to the main sewer line. The main sewer system should be repaired by the city authority. You should dig down to locate the collapsed pipes and fix them if the leakage is minimal.

PIPE BURST
Sewerage pipes can burst or leak due to numerous reasons. For instance when aging underneath pipes leak, they might be overwhelmed by the pressure of the flowing scam and burst. A pipe that have been squeezed for so long by strong tree roots might reach its maximum resistance level and burst thereby releasing all its filthy content on the ground. Repairing the ruptured pipes involves tearing out the broken area as well as inspecting between floors or walls to establish the origin of the leak. If the burst involves pipes with massive content or pipes in complex places like inside septic tanks, it is wise to contact a plumber to fix the problem once and for all.

LEAKING TAPS
Leaking taps are the very common and irritating and can also result to escalating cost of water bills. If it is legal for you to do some plumbing repairs by yourself in your state, the following is what to look out for in regard to leaking taps. You should know that there are three pipe washers that could be triggering the tap to drip abnormally and may be requiring replacement. These washers are; the body washer, the O-ring and the jumper valve. Over-tightening of your tap may eventually cause serious damage to the tap seat which can ultimately make it to leak. To avoid damaging your tap washers, you should only tighten them until the water ceases to flow.

TOILET ISSUES
Toilets are the most essential fixtures in businesses premises and homes. There are a number of issues that can crop up in toilets. These problems may be in form of flushing difficulties, a constantly running toilet, leaks and toilet blocks. Majority of toilet issues are caused by age and misuse. These minor problems can be repaired by changing individual components or resealing. A pro-active measure for curbing blockages is by ensuring that small amounts of tissue paper are used and no non-decomposing objects find their way into the toilet system.

BLOCKED DRAINS
Blocked drains are other common problems that make one to call the plumbers in his or her home. There are various reasons drains get blocked. These include; deficient gradient to give the scam momentum to flow, hard objects inside the system, misaligned or collapsed pipes damage by tree roots. Most blocked pipes problems are inherited with the houses when you buy or rent it. Hiring licensed plumbers for repair work will help prevent some looming problems, but problems such as tree root invasion may require your personal removal of trees roots or use of root killers.

HOT WATER HEATER REPAIRS
Replacement of hot water heaters is another common task for which plumbers get called out for. However, this may be one job that you may not be allow by law to fix yourself and the manufacturer’s guarantee may be of no help to you if you do not have a licensed plumber do the installation. Water heaters should last between 5 and 15 years depending on the type of you buy. The following are some of the signs that suggest that your water heater may need replacement; lower than normal temperature, rust-colored water and moisture around the base of the heater.

LEAKY OR CLOGGED KITCHEN FAUCETS
For leaking or completely clogged kitchen faucets, the first place to check is the end of the faucet which is called the aerator. Unscrew the aerator and check if there are any solid particles stuck inside it. If the solid particles are present, this is a good sign that there may be an obstruction in your faucet. Test by letting water run without the aerator for a little while and re-fix it. If the faucet still leaks, the fault could be with the washer inside the faucet. If you are not comfortable disintegrating the faucet yourself, contact a licensed plumber for help.

How to find a plumber Finding licensed and qualified plumbers for service and emergency repairs.

plumbers

Finding a licensed and qualified plumbing company in Charlotte for plumbing service and emergency repairs.
No one wants to hire an inexperienced and unlicensed plumber to do repairs on there home or business. Eventually you are bound to regret in a few days if not hours of hiring their services.

Research on the firms found in your local city is an important place to start. One the best sources of information is former clients and their reviews. They can give important insights on the reputation of company and their professionalism. If one cannot find them then simply log on to the net as most companies have created a presence in an effort to advertise such as ours at our local plumbing company website.

Create a shortlist of viable firms and run them against a list provided by the city authorities in your area. It will help find those contractors who are properly registered and fulfill the city by-laws. Get in touch with all contractors who have passed the test and ask for a quote on the job you need repairs done.
On identification of a firm within budget, get in touch with it and have it draw up an agreement. Agreement should define the duration expected to be done on the works and rates the firm expects to be paid and any fines levied and under what circumstances. It should also stipulate what you as the client is expected to provide in terms of materials.

A contract is then offered which should clearly define the term it is valid for and if there any other chances of renewing it. Study the document carefully and if anything does feel right then do not sign but review it with the company representative. Proof of insurance should also be provided to ensure that any damage to your house hold appliances or structures during work is covered and compensated.

Peace of mind is one of the major benefits of contracting a qualified Charlotte plumbing repair company. They are also available, in most cases, 24 hours a day 7 days a week and should be helpful if you do find yourself in a plumbing pipe emergency at any time. Since they also know all the city by-laws on any amendments and repairs to the drainage system they will ensure you remain on the right side of the law when it comes to improvements and repairs.

A Quality Plumber Inc is a skilled Huntersville NC plumbers and will be able to fix your plumbing problems any day, any time. Call today to take care of all of your plumbing repair needs.

Common Toilet problems/ Charlotte Plumbers Blog.

2889.216.020

Are you experiencing issues with your toilet? If so, we hope you find this Toilet Troubleshooting guide useful. Please remember that it’s often more economical to call a Licensed Charlotte Plumber, like Charlotte Plumbing & Repair to troubleshoot and fix your plumbing issues. Our number is (704)394-5252, and we have technicians standing by, 24 hours a day, 7 days a week.

As folks retire for the evening to sleep, water pressure in municipal water systems begins to rise. This increase in stress can be transferred to a worn ball cock valve and trigger it to vibrate ever so slightly. This is the moaning you are hearing. Get a new valve.

Ghost Flushing

Does your toilet tank start to fill on its own? In other words, run for an extra five or 10 seconds? This is usually due to the following causes: poorly fitting/leaking flapper and/or a refill tube that is too long. A worn flapper or corroded flapper seat will trigger water to slowly drain from the tank into the toilet bowl. After an hour or two the water level drops enough and the fill valve kicks on. The same thing can happen if the water line that runs from the base of the fill valve to the inside of the overflow tube is simply too long. This may siphon water from the tank. New fill valves come with a special clip that holds the tip of the water line up and ensures that water will stay in the tank where it belongs.

Multiple Flushes

Do you flush your toilet and get two for the value of 1? If that’s the case, the water level within the tank could also be too high. Alter the float management on the fill valve and try to drop the water level in the bathroom tank one inch or so. Trial and error will let you get the water level correct.

Partial Flushes

You flush the toilet and get cheated. The flapper valve can get waterlogged over time and flop down too quickly. The chain that connects between the flapper valve and the flush handle could also be too tight. Adjust it one link at a time. The water level in the toilet tank could also be too low. Modify the fill valve so that extra water enters the tank. You may have a primary era low flush toilet. If so, you are toast! These toilets have basic design flaws. They simply don’t have sufficient power to flush the bathroom bowl correctly. In case you have one in every of these 1.6 gallon flush nightmares, hold on, help may be on the way. It appears that the 1992 legislation requiring these bad boys could be repealed. If this happens, 3.5 gallon toilets could come back.

Whistle While it Works

As the toilet tank fills and is sort of finished, it makes all sorts of excessive pitched noise, right? You most likely have an old fashioned ball cock fill valve with a float ball on an arm. These valves close slowly as the water stage rises and the valve begins to vibrate as this happens. The answer is a brand new fill valve. These new valves stay open completely till the bathroom tank is filled. The shut off is instantaneous.

Tough Toilet Bowl Stains

Do you have stains in your toilet bowl that just won’t budge? If so, DON’T use abrasive cleaners! Use white vinegar or muriatic acid to wash the bowl. White vinegar is safer, but takes longer. Muriatic acid can clean a toilet bowl inside minutes. Be careful!

Toilet Bowl Water Level Drops

After you walk away from the toilet, does the water degree mysteriously drop? If that’s the case, two things could be wrong. The toilet could be partially clogged. The clog can cause a siphon and pull water from the bowl. The other possibility is more severe: there could be a crack or small defect within the colon of the toilet. That is the channel that water passes by means of to get to the drain pipe. A colon crack or defect means it is time for a new toilet.

Low Energy Flushes

The water release holes within the lip of the bowl my be clogged with water deposits. Pour a quart of muriatic acid down the overflow tube in the tank to clean these holes. You should hear a sizzling sound if the deposits are heavy. The acid will not hurt the toilet. It’s also possible to attempt to open these holes with a toothpick should you do not have acid.

Shaking Toilet

Does your toilet rock whenever you sit on it? If so, the grout between the toilet and the ground must be replaced. Grout must be used as an alternative of caulk. Caulk is flexible and will allow toilet movement.

Water Leaks at Base of Toilet

In the event you see water leaking around the base of the bathroom or in the room below when it’s flushed, the wax gasket between the toilet and the drain pipe flange has to be changed. This is not a DIY friendly activity although the TV exhibits make it seem so! For those who tackle this, be sure to have access to a different toilet as you could be opening a can of worms! Contact Us and let Legacy Plumbing Company, your Raleigh Plumber fix this.

Save Water With Brick?

Putting in brick in a toilet tank to displace water could assist save a little bit water, however it usually causes more problems. Drop one while putting in it, and you could crack the tank. The brick also can interfere with the operation of the shifting elements in the tank, and cause less powerful flushes, resulting in more water being used.

Gradual or Noisy Refill Water Stream

If the water entering the toilet enters slowly, the shut off valve may be only partially open. Test to verify this valve is open all of the way. If water rushes into a toilet tank too quickly, close the valve so that the water flows in a more controlled fashion.

Still having problems with your toilet? Charlotte plumbing repair technicians are available 24 hours a day in Charlotte metro area. Simply call Charlotte Plumbing & Repair at (704)394-5252 or Contact Us, and we will call and schedule an appointment with you.
1025 w trade st
Charlotte, NC 28202

Slab Leak Detection

Slab Leak Detection (704)394-5252
A slab leak is the name the plumbing industry uses to refer to the leaks that occur in piping located beneath concrete or stone, usually in a home’s foundation. These leaks are often difficult for homeowners to detect (until the damage becomes serious) and require special tools for plumbers to locate them. Precision equipment is necessary because repairing slab leaks often involves excavation to reach the pipes. The narrower the digging area, the less damage the plumber will need to do to a home’s construction material.

With the trained plumbers from Charlotte Plumbing & Repair working on any slab leak in Charlotte, NC you may experience, you will have the troubled solved quickly and with minimal damage to your home’s foundations. Our plumbers will bring the best slab leak detection equipment available, including:

Electromagnetic pipeline locators
These tools work something like radio antennas: they send out signals of electrons which they then pick up using a receiver, allowing the plumber to map out the pipe location under the slabs and find anomalies. These are extremely useful for non-metallic pipes.

Electronic amplification equipment
This is a fancy way of describing listening equipment. The sound sensors used in slab leak detection are designed to hear through layers of hardscape to locate the sound of dripping or gushing water. (A simple stethoscope will not do this job.) One of the common devices is the multi-sensor ground microphone.

Gas tracer systems
A problem that aural sensors can encounter when trying to find leaks is that an area can have too much noise for the plumber to effectively make out the sounds of the leaking pipe. In these situations, gas tracer systems are an excellent solution, pinpointing leaks with specially designed probes. They are also useful for very deep leaks where listening equipment is ineffective.

Video pipe inspection equipment
If plumbers can access an entrance to the affected pipe, the can use miniaturized cameras on the end of fiber-optic cables to probe down into the pipeline. The video feed on a monitor allows the plumber a view of the pipe interior that will locate the exact spot of the leak.

There’s one more important tool that plumbers bring to leak detection: their own minds. Plumbers have training to use the equipment to get the right results. Without the proper education, these tools are essentially useless. Contact the leak detection experts at Charlotte Plumbing & Repair if you think you may have a leak somewhere in your home.

When you notice that you might have a slab leak. Call for the experts at Charlotte Plumbing & Repair to handle detecting a slab leak in Charlotte, NC.
704-394-5252 http://www.charlotteplumbingsvc.com

Winter maintenance tips for your home.

download
Keep your home warm and dry this season by reducing plumbing repairs before they happen – with some preventative maintenance, of course. Avoid the hazards of cold weather by completing these action items before the temperatures dip.
Check up on the heating and insulation system
If you live in a cold climate, the heating system will be running constantly during winter. This calls for proper cleaning, insulation and ventilation of your HVAC system, crawlspace and attic. Clean or change out your HVAC filter in preparation for heavy usage, and make sure the attic area is properly insulated. Insulation in the crawlspace and ceilings will keep the heat inside the living space and prevent warm air from escaping. Sealing the gaps around windows, plumbing, vents and lighting fixtures will also maximize energy efficiency in your property.
Prevent frozen pipes
Avoid frozen pipes this season – and all the collateral damage they can cause – by adding extra insulation to exposed pipes in the crawlspace, basement or attic. Damage due to frozen pipes is common but completely preventable. Taking the precaution to seal, insulate and wrap pipes will prevent cold air from getting into the pipes. Exterior faucets should be drained and shut off for the season. Educate your tenants about what they need to do when the temperature drops, such as leaving a trickle of water on overnight, leaving cabinet doors open, and keeping the thermostat at a consistent temperature.
Winter-proof the exterior
Your landscaping may have gone dormant, but you’re not done with yard work yet. Prevent damages from icy conditions by trimming trees and shrubs so they don’t brush up against the walls and windows. Regularly inspect your roof for the formation of ice dams, which can damage your roof and cause water leakage. Close any crawlspace vents in the foundation, and seal any cracks or small openings so small critters can’t burrow in. If your residents are taking care of snow removal on your property, move snow shovels and blowers to an accessible spot.
Prepare for the worst
A bad storm can result in a blackout or being snowed in. Remember to be prepared for the worst by keeping bottled water, non-perishable food, flashlights and emergency phone numbers on hand.


As seen on PlumberSpot.com

The Importance of Hiring Professional Plumbers

Plumber
What is the Importance of Hiring Professional Plumbing Services.

There are many people that feel that they need to update, or repair, some of the plumbing in their house. They may think that they can do this on their own, but this is not a good idea. Many times, when a homeowner starts to perform a plumbing repair they can actually make the problem worse than it is.

Adding the extra expense of having to purchase specialized tools and materials complicated the process even further. Lastly, trying to find information on how to correctly repair the issue could be very time consuming. We can help with our plumbing services.

Why is Hiring a Professional Plumbing Service Important?

A homeowner that hires a plumbing professional is not only saving time but is also saving money. A plumbing professional is an individual that typically has years of experience in the plumbing field and has all of the skills needed to perform any plumbing repair. This individual also has the proper training needed to operate some of the specialized equipment that nay be needed for a plumbing job.

Also, many of the plumbing professionals that are in business are also insured, bonded, and they offer warranties. This means that a homeowner can rest easy that the job will be done right the first time. They won’t have to worry about multiple trips to a home improvement store or plumbing supply house.

Instead, they can go about their life as normal while the takes care of the plumbing problem that is in the house or business. Hiring a plumbing professional will also free up a homeowner to continued their daily scheduled activities instead of having to worry about being tied up trying to repair a plumbing issue themselves. Many of the plumbing professionals that are available for hire are very reasonably priced.

Plumbing ServicesMany of the homeowners are finding out that they would rather invest a little bit of time into hiring a professional than to spend countless hours trying to diagnose, and fix a problem.
The Facts

The fact that a plumbing professional is insured and bonded also gives an added level of security for the homeowner in knowing that they will not have to worry about any potential damage to the home or the plumbing system if something unforeseen happens.

Many of the plumbers that are available for hire are very proficient at what they do and they can get a house’s plumbing system to work properly again in a short time.

Looking to hire a professional plumber in your Charlotte, NC home ? Call Charlotte Plumbing & Repair today 704-394-5252 today, to get the reliable service you deserve.
1025 W Trade St
Charlotte, NC 28202

Blog Directory & Business Pages - OnToplist.com

Friendly Environmentally Plumbing

There are a lot of means we can ease our influence on the environment. Making your home plumbing system more environmentally friendly is among them. Greening up your plumbing will have direct perks on the environment, and will save you cash in the long run says Charlotte Plumbing & Repair.

These 5 enhancements to your plumbing system will make the basic things you do every day much better for the environment:

Plumbing Repair Huntersville.
A domestic continuous made by Rinnai in Japan.

Tankless water heater. These energy-saving appliances significantly minimize your environmental effect. Water is rapidly warmed by a heating aspect that provides hot water on demand without a holding tank. Rather of heating 40 or more gallons of water 24/7, tankless water heaters only heat the water you make use of.

Low-flow commodes, fixtures and faucets. We’ve come a long way since the first low-flow fixtures and toilets were introduced to the marketplace. New technology has actually made them not just more reliable, but more effective. Updating your plumbing system with eco friendly fixtures minimizes the amount of water you make use of, and the amount of water you spend for.

Efficient appliances. Anything that makes use of water in your home belongs to your plumbing system. That consists of dishwashers, automatic ice makers, laundry equipment, water heaters and centralized humidifiers. Water is becoming a progressively important resource. The quality and price of water depend on our efforts to make our home water utilize more eco friendly. Update your plumbing system with efficient home appliances that make the most utilize from the least water.

Aerators. Faucet aerators pressurize water that originates from your tap. By presenting air to the stream of water, aerators reduce water use without decreasing water pressure. Aerators frequently increase your water pressure while decreasing overall flow of water in a house.

Pipe insulation. Water heaters are typically located in the basement or remote area of a house. The further hot water needs to travel to the sinks and appliances in your house, the even more heat is lost through the pipes that bring it there. A simple means to maintain more of that heat is to purchase and set up pipe insulation around your hot water pipes. The versatile foam insulation is inexpensive and easy to install. More importantly, it will make your hot water use more reliable and ecologically friendly.

Charlotte Plumbing & Repair hope you take a look at our homepage here too! WWW.charlotteplumbingsvc.com

What to do in a plumbing emergency

plumbers

Charlotte plumber sooner or later most homeowners will experience some type of plumbing emergency. Understanding what to do when a problem occurs will make the emergency much easier to deal with.

First, prepare yourself by locating the water shut-off valve, which is located next to your water meter. Once you have located your water meter, the valve next to it will be the water shut-off valve. By turning off the shut-off valve, you will stop all water from entering your home, thus minimizing water damage.

After you have shut-off the water supply, it is also a good idea to open all sink faucets to drain the water from the pipes to further minimize damage. Then, immediately call a plumber. Reputable, professional plumbers can usually send a technician out in a few hours. Follow any instructions given to you, while you wait for them to arrive.
It is also a good idea to use a mop, rags or paper towels to remove excess water, to help keeping water damage to a minimum.

In the case of overflowing toilets, you can shut-off the toilet water supply valve. This valve can usually be located between the bathroom floor and the toilet tank, on the water line supplying the toilet. If this is your plumbing problem, it is not necessary to shut-off the water to the entire home.

Clogged toilets and sink drains can sometimes be opened with a chemical drain opener. If this does not work, a plunger or snake can be tried to remove the clog. If these methods fail to open the clogged drain, you will need to call a plumber.

If it is a water heater problem, immediately shut the unit off. It is a good idea to locate the electrical shut-off switch beforehand. Also be sure to keep the telephone number of a licensed, professional plumber, with emergency services, handy. Handling a plumbing emergency can be made much easier, by following the steps above.

Are you facing a plumbing emergency in the Charlotte,Lake Norman area? Stop and call Charlotte Plumbing & Repair immediately at (704) 394-5252.

Leak Detection & Emergency Plumbing